Introduction:
Elegant upgraded version, model called GEP-KHX5, the biggest feature is to reduce the cost of loss, we will use the Hybrid-X solution, redesign the split arm, the wheelbase is reduced to 230mm, still maintain stability, center concentration, suitable Freestyle and competition. In addition, we have made some minor adjustments in the details, such as a 3D print, which is more convenient for fixed images to transmit 5.8g antenna and 2.4g antenna.
Structurally, the biggest feature of "elegance" is the balance of the center point of the battery, so that the center of the battery is centered. This design is conducive to the turning feel during the competition, and it is not easy to drift. Moreover, such a design has a more uniform effect, so that all four motors are powered on average, reducing the heat generated by the motor and increasing the efficiency of the battery. And we used a 230mm large wheelbase, HybridX design.
In the material, all the carbon plate parts are all made of 3K pure carbon fiber sheet s, high precision CNC split arm. In the camera and video camera base, we chose the high-strength aluminum alloy of the 7075 model to be processed with high precision, which is finely docked with the carbon plate. The hardness of the traditional carbon plate design is increased by 50%, which makes the pilot more bold and confident to fly, and it is not easy to crash the equipment. However, we still control the weight at 120g.
On the electronic equipment, the "elegant" factory is equipped with LED tail light board (including buzzer, CF/BF support is required). The whole machine adopts YFS screw, 12.9-level strength, it is not easy to rust, and the strength is sufficient.
Size parameters:
GEP-KHX7
Weight: 135g
Wheelbase: 300mm
Propeller: 7 inches
Size: 270 × 220mm
Arm thickness: 4mm
Splint: 2mm
Side panel: 1.0mm
Recommended configuration:
Flight Controller: Kiss/F3/F4/Naze32/CC3D
Motors: 2204/2205/2206/2305/2306
ESC: 20A-50A
Propeller: 5inch
Battery: 3S 1300mAh ~ 4S 1500mAh
Features:
1. The battery is placed above the arm, symmetrically distributed with the fuselage up and down, the center is at the center of the whole, the flight feel is real, the motor output of each axis is more balanced, the efficiency is higher, and the risk of battery damage during the collision is reduced.
2. The camera and video recorder parts use #7075 aviation aluminum alloy, high-precision CNC to ensure beautiful and sturdy
3. Full 3K carbon fiber board high precision CNC split arm, simple and solid structure, 14mm narrow arm design, smaller wind resistance
4. Front and rear aluminum support, side panel and aluminum fittings, solid structure, effectively protect the electronic equipment inside the fuselage, tail square aluminum column fixed LED tail light board, integrated seek buzzer, practical and beautiful
5. Hybrid X structure, shortening the wheelbase, flexibility and stability
6. 6 2812 taillights and integrated bb ring, the flight process is cool, and the built-in buzzer makes it easier to find the plane.
7. The edge of the motor base is designed to protect the motor during the collision, and the motor wire limit hole is added. The wire motor wire is better placed under the arm, which is more beautiful and better protects the motor wire and ESC.
8. 2mm thick bottom plate to ensure that the flight control and other components inside the fuselage are not damaged during collision and landing.
9. YFS screw, class 12.9 hardness
Package Includes:
GEPRC GEP-KHX quadcopter frame * 1 set
Camera ,motor is not included!
Package Includes::
GEPRC GEP-KHX quadcopter frame * 1 set
Camera , motor is not included!
